Thay vì tách và lọc, bạn có thể sử dụng np.fromstring:
>>> np.fromstring(b, sep='\t').reshape(-1, 4) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]])Điều này luôn trả về một mảng 1D nên việc định hình lại là cần thiết.
Ngoài ra, để tránh định hình lại, nếu bạn đã có một chuỗi byte (vì các chuỗi nằm trong Python 2), bạn có thể sử dụng np.genfromtxt (với sự trợ giúp của mô -đun IO của Thư viện tiêu chuẩn):
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]])genfromtxt xử lý các giá trị bị thiếu, cũng như cung cấp nhiều quyền kiểm soát hơn đối với cách tạo mảng cuối cùng.
Một cách để chuyển đổi các mảng 2D (của phao) thành một chuỗi và sau đó là một cách để đọc chúng trở lại để xây dựng lại mảng: ARR_TO_STRING (mảng ([[0.5544, 0.4456], [0.8811, 0.1189]])) sẽ trở lại "[[[[[[[ 0,5544 0,4456], [0,8811 0.1189]] ".
Chuỗi đến mảng 2D python với các ví dụ mã
string ="hello world" array[string.len()][]Bằng cách nghiên cứu một loạt các ví dụ khác nhau, chúng tôi đã có thể tìm ra cách khắc phục chuỗi thành mảng 2D.
Làm cách nào để chuyển đổi một chuỗi thành một mảng 2D trong Python?
Nếu bạn muốn chuyển đổi một chuỗi thành một mảng các ký tự, bạn có thể sử dụng phương thức danh sách (), một hàm sẵn có trong Python. Lưu ý: Nếu chuỗi chứa khoảng trắng, nó sẽ được coi là ký tự và khoảng trắng cũng sẽ được chuyển đổi thành danh sách.20-AUG-2022
Làm thế nào để bạn chuyển đổi một chuỗi thành ma trận 2D?
Để chuyển đổi một chuỗi thành một mảng hai chiều, trước tiên bạn có thể sử dụng phương thức Split () để chia chuỗi thành các giá trị loại int và lưu trữ chúng trong một mảng một chiều. Sau đó đọc các giá trị trong một mảng một chiều và lưu trữ chúng trong một mảng hai chiều.26-Jun-2019
Bạn có thể tạo ra các mảng 2D trong Python không?
Python cung cấp nhiều cách để tạo danh sách/mảng 2 chiều.13-SEPT-2022
Làm thế nào để bạn chuyển đổi một chuỗi thành một ma trận trong Python?
Khoa học dữ liệu thực tế bằng cách sử dụng Python Khi bắt buộc phải chuyển đổi một chuỗi thành một ma trận có ký tự 'K' mỗi hàng, một phương thức được xác định lấy một chuỗi và giá trị cho 'K'. Nó sử dụng một lần lặp đơn giản, toán tử mô đun và phương thức 'phụ lục'.13-sept-2021
Tôi có thể chuyển đổi chuỗi thành mảng python không?
Để chuyển đổi chuỗi thành mảng trong python, hãy sử dụng chuỗi. Phương thức chia (). Chuỗi. Phương thức chia () chia chuỗi từ dấu phân cách và trả về các phần tử chia làm mục danh sách riêng lẻ.25-sept-2020
Làm thế nào để bạn chuyển đổi một chuỗi thành một ma trận?
Cho một chuỗi độ dài L. Nhiệm vụ là chuyển đổi chuỗi thành lưới.approach:
- Mà không sử dụng một chức năng sẵn có.
- Tạo một mảng ký tự 2D có kích thước (hàng *).
- Gán giá trị k là giá trị cột.
- In mảng ký tự 2D.
Làm thế nào để bạn in một định dạng ma trận trong Python?
Sử dụng vòng lặp For để in ma trận trong Python, chúng tôi sử dụng hàm bản đồ, chuyển đổi toàn bộ hàng thành chuỗi, và sau đó chúng tôi áp dụng chức năng tham gia cho toàn bộ hàng này chuyển đổi tất cả thành một chuỗi và các phần tử riêng biệt bằng cách phân tách được chỉ định.20-Mar-2021
Phương pháp nào được sử dụng để chuyển đổi tất cả các ký tự trong một chuỗi thành một mảng ký tự?
Phương thức Chuỗi Java Tochararray ()
Làm cách nào để tạo một loạt các chuỗi 2D trong C ++?
Có 3 cách để tạo ra mảng chuỗi. Sử dụng mảng 2D (cả C và C ++): Phương pháp này rất hữu ích cho việc xáo trộn, so sánh và truy cập các ký tự một cách ngẫu nhiên. Cú pháp: char tên tên [[Số lượng chuỗi trực tuyến]
Làm thế nào để bạn lập một danh sách hai chiều trong Python?
MYLIST = [0,1,2,3,4,5,6,7,8,8]; Đối với Index in Len (Mylist): Mylist [index] = 0 # SET phần tử ở "INDEX" thành 0. Đối với danh sách hai chiều, để tham chiếu mọi phần tử, chúng ta phải sử dụng hai vòng lặp lồng nhau. Điều này cung cấp cho chúng tôi một biến bộ đếm cho mỗi cột và mỗi hàng trong ma trận.
Một cách để chuyển đổi các mảng 2D (của phao) thành một chuỗi và sau đó là một cách để đọc chúng trở lại để xây dựng lại mảng: ARR_TO_STRING (mảng ([[0.5544, 0.4456], [0.8811, 0.1189]])) sẽ trở lại "[[[[[[[ 0,5544 0,4456], [0,8811 0.1189]] ".
Xem thảo luận
Cải thiện bài viết
Một cách để chuyển đổi các mảng 2D (của phao) thành một chuỗi và sau đó là một cách để đọc chúng trở lại để xây dựng lại mảng: ARR_TO_STRING (mảng ([[0.5544, 0.4456], [0.8811, 0.1189]])) sẽ trở lại "[[[[[[[ 0,5544 0,4456], [0,8811 0.1189]] ".
Xem thảo luận
Cải thiện bài viết
Lưu bài viết
Examples:
Đọc& l = length of the string
Approach:
- Bàn luận
- Cho một chuỗi độ dài L. Nhiệm vụ là chuyển đổi chuỗi thành một lưới.examples: & nbsp; & nbsp;
- Lưu ý: & l = chiều dài của chuỗi & nbsp; & nbsp;
- Mà không cần sử dụng chức năng sẵn có
Tạo một mảng ký tự 2D có kích thước (hàng *).
C++
#include <bits/stdc++.h>
Gán giá trị k là giá trị cột.
In mảng ký tự 2D.
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Dưới đây là việc thực hiện phương pháp trên. & Nbsp; & nbsp;
using namespace >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 0
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4string ="hello world" array[string.len()][] 1string ="hello world" array[string.len()][] 2string ="hello world" array[string.len()][] 3string ="hello world" array[string.len()][] 4string ="hello world" array[string.len()][] 5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4string ="hello world" array[string.len()][] 7string ="hello world" array[string.len()][] 8string ="hello world" array[string.len()][] 3string ="hello world" array[string.len()][] 4string ="hello world" array[string.len()][] 5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 1 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 2
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s6
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 6
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 9
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s4
np.genfromtxt0np.genfromtxt1
np.genfromtxt0np.genfromtxt3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 9
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s4
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s8 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s9
#include <bits/stdc++.h>3#include <bits/stdc++.h>4#include <bits/stdc++.h>5
np.genfromtxt0#include <bits/stdc++.h>7
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5using1
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring1 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 np.fromstring4
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4using9namespace0#include <bits/stdc++.h>5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4namespace3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 np.fromstring9
np.genfromtxt5
np.genfromtxt0Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 #include <bits/stdc++.h>0#include <bits/stdc++.h>1#include <bits/stdc++.h>2
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 using6
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4namespace5 namespace6
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Java
namespace8 namespace9
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 16>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 18
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 20>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 22
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s4
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s6
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 02 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 1 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 04
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 6
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 122____113>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 14
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 58
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 59>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 60
#include <bits/stdc++.h>3np.genfromtxt3
np.genfromtxt0np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 42>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 13>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 44
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0np.fromstring1 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 51>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 13>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 53
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 #include <bits/stdc++.h>0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 13#include <bits/stdc++.h>2
#include <bits/stdc++.h>3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 59#include <bits/stdc++.h>4#include <bits/stdc++.h>5
#include <bits/stdc++.h>3np.genfromtxt5
#include <bits/stdc++.h>3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 98
np.genfromtxt0np.genfromtxt5
np.genfromtxt0string ="hello world" array[string.len()][] 02string ="hello world" array[string.len()][] 03string ="hello world" array[string.len()][] 04
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4string ="hello world" array[string.len()][] 10 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 02 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 1 string ="hello world" array[string.len()][] 13
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5string ="hello world" array[string.len()][] 17namespace0#include <bits/stdc++.h>5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5namespace3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
np.genfromtxt5
Python3
string ="hello world" array[string.len()][] 25 string ="hello world" array[string.len()][] 26string ="hello world" array[string.len()][] 27string ="hello world" array[string.len()][] 28
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring1 string ="hello world" array[string.len()][] 31string ="hello world" array[string.len()][] 32 string ="hello world" array[string.len()][] 33string ="hello world" array[string.len()][] 3string ="hello world" array[string.len()][] 35string ="hello world" array[string.len()][] 3string ="hello world" array[string.len()][] 27__
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 string ="hello world" array[string.len()][] 31string ="hello world" array[string.len()][] 42string ="hello world" array[string.len()][] 43string ="hello world" array[string.len()][] 44string ="hello world" array[string.len()][] 44 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 13string ="hello world" array[string.len()][] 47
np.genfromtxt0string ="hello world" array[string.len()][] 49string ="hello world" array[string.len()][] 44 string ="hello world" array[string.len()][] 27string ="hello world" array[string.len()][] 525____253string ="hello world" array[string.len()][] 54
np.genfromtxt0string ="hello world" array[string.len()][] 56string ="hello world" array[string.len()][] 44 string ="hello world" array[string.len()][] 58
np.genfromtxt0np.fromstring1 string ="hello world" array[string.len()][] 61string ="hello world" array[string.len()][] 32 string ="hello world" array[string.len()][] 63
#include <bits/stdc++.h>3string ="hello world" array[string.len()][] 65
np.genfromtxt0string ="hello world" array[string.len()][] 67string ="hello world" array[string.len()][] 3string ="hello world" array[string.len()][] 69string ="hello world" array[string.len()][] 70
string ="hello world" array[string.len()][] 26namespace0string ="hello world" array[string.len()][] 73string ="hello world" array[string.len()][] 74#include <bits/stdc++.h>2
string ="hello world" array[string.len()][] 76string ="hello world" array[string.len()][] 77 string ="hello world" array[string.len()][] 78string ="hello world" array[string.len()][] 77string ="hello world" array[string.len()][] 76
C#
using string ="hello world" array[string.len()][] 82
namespace8 namespace9
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 02 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 1 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 04
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 string ="hello world" array[string.len()][] 94
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 9
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 16>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s01
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 20>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s05
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s4
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s6
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s8 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s17>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 35 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s8Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s20
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s25
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0____41 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s32
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s37
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 59Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s39
#include <bits/stdc++.h>3np.genfromtxt3
np.genfromtxt0np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s25
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0____41 string ="hello world" array[string.len()][] 3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 5 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s32
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 59#include <bits/stdc++.h>4#include <bits/stdc++.h>5
#include <bits/stdc++.h>3np.genfromtxt5
#include <bits/stdc++.h>3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s71
np.genfromtxt0np.genfromtxt5
np.genfromtxt0Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s75string ="hello world" array[string.len()][] 03string ="hello world" array[string.len()][] 04
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
#include <bits/stdc++.h>3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s62
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5string ="hello world" array[string.len()][] 17namespace0#include <bits/stdc++.h>5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5namespace3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4string ="hello world" array[string.len()][] 10 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 02 >>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 1 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s86
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s98
PHP
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s99 np.fromstring00np.fromstring01#include <bits/stdc++.h>2
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring05 np.fromstring06np.fromstring07string ="hello world" array[string.len()][] 3np.fromstring01string ="hello world" array[string.len()][] 04
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring12 np.fromstring13
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring15 np.fromstring06__22222218np.fromstring05np.fromstring20
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring22 np.fromstring06string ="hello world" array[string.len()][] 8np.fromstring18np.fromstring05np.fromstring20
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 string ="hello world" array[string.len()][] 3np.fromstring15 np.fromstring32np.fromstring22
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring15 np.fromstring06np.fromstring2222
np.fromstring49np.fromstring45np.fromstring46np.fromstring22string ="hello world" array[string.len()][] 73string ="hello world" array[string.len()][] 03np.fromstring20
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring43 np.fromstring06np.fromstring45np.fromstring46np.fromstring15np.fromstring48
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring1 string ="hello world" array[string.len()][] 3np.fromstring59 np.fromstring60__
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3np.fromstring84np.fromstring85string ="hello world" array[string.len()][] 3np.fromstring01np.fromstring88np.fromstring12np.fromstring90
np.genfromtxt0np.fromstring43np.fromstring88np.fromstring59np.fromstring95np.fromstring72np.fromstring97np.fromstring01np.fromstring88np.fromstring12np.genfromtxt01
np.genfromtxt0np.fromstring12np.genfromtxt04
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring43 np.fromstring06np.fromstring45np.fromstring46np.fromstring15np.fromstring48
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.fromstring1 string ="hello world" array[string.len()][] 3np.fromstring59 np.fromstring60__
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 string ="hello world" array[string.len()][] 3np.fromstring72 np.fromstring60__
#include <bits/stdc++.h>3#include <bits/stdc++.h>4#include <bits/stdc++.h>5
np.genfromtxt0Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 string ="hello world" array[string.len()][] 3np.fromstring43np.fromstring88np.fromstring59np.fromstring95np.fromstring72np.genfromtxt43______71
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
np.genfromtxt0np.genfromtxt50 np.fromstring43np.fromstring88np.fromstring59____495np.fromstring72np.genfromtxt01
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt50 np.genfromtxt61#include <bits/stdc++.h>5
np.fromstring00np.fromstring01string ="hello world" array[string.len()][] 04
np.genfromtxt73
np.fromstring01 np.fromstring06namespace0#include <bits/stdc++.h>5
np.genfromtxt74
JavaScript
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt81
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt83
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt85
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt87
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s4
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s6
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt98>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 35 genfromtxt00
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 genfromtxt03
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0genfromtxt07>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 35 genfromtxt09
np.genfromtxt0np.fromstring1 genfromtxt12
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3genfromtxt16
np.genfromtxt0np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 genfromtxt03
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0np.fromstring1 genfromtxt12
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3genfromtxt33
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 59np.genfromtxt1
#include <bits/stdc++.h>3np.genfromtxt3
np.genfromtxt0np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.fromstring1 genfromtxt03
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0np.fromstring1 genfromtxt12
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
np.genfromtxt0>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 3
#include <bits/stdc++.h>3Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s3 genfromtxt54
#include <bits/stdc++.h>3np.genfromtxt5
#include <bits/stdc++.h>3genfromtxt63
np.genfromtxt0np.genfromtxt5
np.genfromtxt0genfromtxt67genfromtxt68string ="hello world" array[string.len()][] 04
Input : str = "haveaniceday" Output : have anic eday Explanation: k is the separator. If k is 4 then the output will be "have anic eday" Input :str = "geeksforgeeks" Output : geek sfor geek s5np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4np.genfromtxt5
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 4genfromtxt75namespace0#include <bits/stdc++.h>5
genfromtxt78namespace3
genfromtxt80
>>> import io >>> np.genfromtxt(io.BytesIO(b)) array([[ 191.25 , 0. , 0. , 1. ], [ 191.251, 0. , 0. , 1. ], [ 191.252, 0. , 0. , 1. ]]) 59#include <bits/stdc++.h>4#include <bits/stdc++.h>5: O(row*column), where L is length of given string and row = floor(sqrt(L)), column = ceil(sqrt(L))
Độ phức tạp về thời gian: O (Cột*Cột), trong đó l có độ dài của chuỗi đã cho và hàng = sàn (sqrt (l)), cột = ceil (sqrt (l)): O(row*column)