(Nếu sản phẩm này được bán ở Canada, bạn có thể truy cập tài liệu này bằng tiếng Pháp của Canada tại https://www.netgear.com/support/download/.) Để biết thông tin về tuân thủ quy định bao gồm Tuyên bố về sự phù hợp của Liên minh Châu Âu, hãy truy cập https://www.netgear.com/about/regulatory/. Xem tài liệu tuân thủ quy định trước khi kết nối nguồn điện. Để biết Chính sách Bảo mật của NETGEAR, hãy truy cập https://www.netgear.com/about/privacy-policy. Bằng cách sử dụng thiết bị này, bạn đồng ý với các Điều khoản và Điều kiện của NETGEAR tại https://www.netgear.com/about/terms-and-conditions. Nếu bạn không đồng ý, hãy trả lại thiết bị cho nơi bạn mua trong thời hạn trả hàng. Indeed, the original idea was to use DG834Gv4 as a router. With one of the four Ethernet ports, instead of ADSL port, being connected to the Internet (upstream router). DG834Gv4’s built-in DHCP server would assign private IPv4 addresses to wireless clients, DNS in those leases would point to 1.1.1.2 or 1.1.1.3 for additional security (https://1.1.1.1/family/). DG834Gv4’s built-in NAT would ensure that larger LAN IP address scheme remains unaffected, no need to extend the scope or shorten lease duration, as DG834Gv4 itself would need only one IP address from larger LAN (all its wireless clients would be behind NAT). I was hoping that someone at Netgear developed such a scheme/firmware years ago, maybe as a side project. Or maybe its ASIC just cannot do this… Your scheme that I had not envisioned, DG834Gv4 as a simple WAP, also solves the problem. But it would require to ensure that existing DHCP scope can accommodate a number of new wireless hosts (as opposed to just one IP address for DG834Gv4 itself, when its NAT is employed), the lease duration is not too long (wireless hosts come and go, wired desktops work for years), and some future changes to IP address scheme by the network administrator would not accidentally exhaust the available pool. Lời khuyên - Tốt nhất là sử dụng kết nối có dây trong khi thiết lập Router Netgear. Điều này tránh nguy cơ đột nhiên bị đăng xuất khi lưu các thay đổi của bạn.
Nếu bạn không thể đăng nhập vào bộ định tuyến của bạn, thì có lẽ bạn đang nhập sai tên người dùng hoặc mật khẩu. Hãy nhớ ghi chú cả hai sau khi bạn thay đổi chúng.
1. What is the username and password of Netgear routers? The majority of the Netgear routers have a default username of admin and a default password of admin 2. What is the default password of a Netgear router? The majority of the Netgear routers have the default password admin 3. What is the default IP of a Netgear router? The majority of the Netgear routers use 192.168.1.254 as the default IP address 4. How to log in to a Netgear router? First, type the router’s IP address in your browser address bar, Then, enter your router username and password, and then click OK or LOGIN. Above, you can find the most probable default credentials. 5. How to troubleshoot a Netgear router? First check if the WAN cable is connected to the correct port of the router which is labelled as “WAN”. Then check if you are connected either by using the Wi-Fi network or a LAN cable connected to a LAN-labelled port of the router. 6. How to reset Netgear router login password? Resetting the admin password of most Netgear routers is simple and requires pushing a reset button, located on the router itself, for 5 to 10 seconds. |