Lỗi invalid configuration information please run setup program năm 2024

(Gần đây, mỗi khi tôi khởi động máy thì luôn xuất hiện dòng chữ "Time-of-day-not-set, Please run SETUP program" và "Alert! System battery voltage is low. Strike the F1 key to continue, F2 to run the setup utility".).

Lỗi này là do trên main của bạn có một cục PIN nhỏ, hay thường gọi mà PIN bios.

Vì máy của bạn đã sử dụng quá lâu do đó quả PIN này đã hết, tác dụng của quả PIN này là để lưu lại cấu hình BIOS khi máy bạn không cắm điện "ví dụ như lưu ngày giờ hệ thống của máy bạn".

Nếu bạn muốn lỗi này không xảy ra nữa thì bạn có thể thay quả PIN này và set lại ngày giờ là sẽ hết báo lỗi.

Are you troubled by the invalid configuration information black screen error message when you boot your computer? Is there any effective way to fix this error? In this post, MiniTool Partition Wizard provides a full guide for this error.

On This Page :

Some users have reported encountering a black screen with the error message Invalid Configuration Information when turning on or starting their Windows computers. When you encounter this issue, you will receive the following full error message, as shown in the image below:

Invalid configuration information – please run SETUP program

Time-of-day not set – please run SETUP program.

Press Fl/VolumeUp key to retry boot

Press F2/VolumeDown key to reboot into setup

Press F5/Home key to run onboard diagnostics

Lỗi invalid configuration information please run setup program năm 2024

–image from dell.com

In this article, we will find out the reasons and provide appropriate solutions you can try to help you fix this Dell invalid configuration information issue.

This event is the result of resetting the BIOS to default values. This is triggered by inadvertently holding down the power button for at least 25 seconds. This error may also be triggered when you put the system in a bag or place the charging card in a location where the power button may be pressed for an extended period of time.

How to Solve Invalid Configuration Information

In this part, we show you 2 ways to fix this invalid configuration information please run setup program issue.

Way 1. Reset Your Custom BIOS Options

If the computer is imaged with the BIOS set in Legacy Mode, this BIOS reset will put the computer into a no-boot configuration as the default BIOS setting is UEFI. If you have been running in Legacy mode, you will need to press the F2 key to enter the BIOS and change the boot order back to Legacy mode, then reboot the system.

You will also need to press the F1 key to boot (since the time and date are not set) and then Windows should automatically update the time and date.

This solution requires you to follow the on-screen instructions to enter the BIOS menu by pressing the F2 key (if connected to a keyboard) or the Volume Down button.

After resetting the custom BIOS options in the BIOS, verify that the date & time are correct and change any other BIOS menu options required for proper configuration, and then restart the system.

If this does not resolve the invalid configuration information issue, continue to the next solution.

Way 2. Replace the CMOS Battery

This solution requires you to replace the CMOS battery on your Windows 10 computer and see if that resolves the invalid configuration information error. You may need the services of a hardware technician for this.

Tips:

To avoid data loss due to this invalid configuration information black error, it is strongly recommended to back up data regularly. You can do that by using the Copy Disk or Copy Partition feature of MiniTool Partition Wizard. It allows you to back up the data to another drive.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Bottom Line

When faced with the invalid configuration information problem, you can try to fix it with the above methods. Hope this article can help you solve this issue. If you run into some problems during the fixing process, you can leave them in the following comment zone.

About The Author

Lỗi invalid configuration information please run setup program năm 2024

Position: Columnist

Vega joined MiniTool as an editor after graduation. She enjoys helping people with computer problems, including disk management, data recovery, and more. She is constantly expanding her knowledge in related fields. And she will continue to bring more easy-to-understand professional articles to help people solve various problems on the PC. In her daily life, Vega enjoys hanging out with friends, shopping online and listening to music. She is someone who knows how to enjoy life.