Người xây dựng__construct (hỗn hợp ...$values = ""): VOID(mixed ...$values = ""): void(mixed ...$values = ""): void(mixed ...$values = ""): void PHP cho phép các nhà phát triển khai báo các phương thức xây dựng cho các lớp. Các lớp có phương thức xây dựng gọi phương thức này trên mỗi đối tượng mới được tạo, do đó, nó phù hợp với bất kỳ khởi tạo nào mà đối tượng có thể cần trước khi nó được sử dụng. Lưu ý: Các hàm tạo cha mẹ không được gọi là ngầm nếu lớp con định nghĩa một hàm tạo. Để chạy một hàm tạo cha mẹ, một cuộc gọi đến cha mẹ :: __ construct () trong hàm tạo con là bắt buộc. Nếu trẻ không định nghĩa một hàm tạo thì nó có thể được kế thừa từ lớp cha giống như một phương thức lớp bình thường (nếu nó không được tuyên bố là riêng tư).: Parent constructors are not called implicitly if the child class defines a constructor. In order to run a parent constructor, a call to parent::__construct() within the child constructor is required. If the child does not define a constructor then it may be inherited from the parent class just like a normal class method (if it was not declared as private). : Parent constructors are not called implicitly if the child class defines a constructor. In order to run a parent constructor, a call to parent::__construct() within the child constructor is required. If the child does not define a constructor then it may be inherited from the parent class just like a normal class method (if it was not declared as private). : Parent constructors are not called implicitly if the child class defines a constructor. In order to run a parent constructor, a call to parent::__construct() within the child constructor is required. If the
child does not define a constructor then it may be inherited from the parent class just like a normal class method (if it was not declared as private).
Ví dụ số 1 người xây dựng trong kế thừa
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } }
class
SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
Không giống như các phương thức khác, __construct () được miễn trừ khỏi các quy tắc tương thích chữ ký thông thường khi được mở rộng. Các hàm tạo là các phương pháp thông thường được gọi trong quá trình khởi tạo đối tượng tương ứng của chúng. Như vậy, chúng có thể xác định một số lượng đối số tùy ý, có thể được yêu cầu, có thể có một loại và có thể có giá trị mặc định. Các đối số của hàm tạo được gọi bằng cách đặt các đối số trong ngoặc đơn sau tên lớp. Ví dụ #2 sử dụng các đối số của hàm tạo
<?php class Point { protected int $x; protected int $y;
public function
__construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
Nếu một lớp không có hàm tạo, hoặc hàm tạo không có đối số bắt buộc, dấu ngoặc đơn có thể bị bỏ qua. Nhà xây dựng kiểu cũ Trước Php 8.0.0, các lớp trong không gian tên toàn cầu sẽ diễn giải một phương pháp được đặt tên giống như lớp như một hàm tạo kiểu cũ. Cú pháp đó không được chấp nhận và sẽ dẫn đến lỗi E_DEPRECATED nhưng vẫn gọi chức năng đó là một hàm tạo. Nếu cả __construct () và một phương thức cùng tên được xác định, __construct () sẽ được gọi.E_DEPRECATED error but still call that function as a constructor. If both __construct() and a same-name method are defined, __construct() will be called. E_DEPRECATED error but still call that function as a constructor. If both __construct() and a same-name method are defined, __construct() will be called. E_DEPRECATED
error but still call that function as a constructor. If both __construct() and a same-name method are defined, __construct() will be called. Trong các lớp theo tên, hoặc bất kỳ lớp nào là của Php 8.0.0, một phương pháp có tên giống như lớp không bao giờ có bất kỳ ý nghĩa đặc biệt nào. Luôn luôn sử dụng __construct () trong mã mới. Mới trong khởi tạo Kể từ Php 8.1.0, các đối tượng có thể được sử dụng làm giá trị tham số mặc định, các biến tĩnh và hằng số toàn cầu, cũng như trong các đối số thuộc tính. Các đối tượng cũng có thể được truyền để xác định () ngay bây giờ.define() now. define() now. define() now. Ghi chú:: : : Việc sử dụng tên lớp động hoặc không chuỗi hoặc lớp ẩn danh không được phép. Việc sử dụng giải nén đối số không được phép. Việc sử dụng các biểu thức không được hỗ trợ làm đối số không được phép.
Ví dụ số 4 sử dụng mới trong bộ khởi tạo ...$values 0
...$values 1
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 0Phương pháp tạo tĩnh PHP chỉ hỗ trợ một hàm tạo đơn cho mỗi lớp. Tuy nhiên, trong một số trường hợp, có thể mong muốn cho phép một đối tượng được xây dựng theo những cách khác nhau với các đầu vào khác nhau. Cách được khuyến nghị để làm như vậy là bằng cách sử dụng các phương thức tĩnh làm trình bao gồm hàm tạo. Ví dụ #5 sử dụng các phương thức tạo tĩnh
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 1
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 2
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 3 Chất xây dựng có thể được làm riêng hoặc được bảo vệ để ngăn chặn nó được gọi là bên ngoài. Nếu vậy, chỉ có một phương pháp tĩnh sẽ có thể khởi tạo lớp. Bởi vì chúng nằm trong cùng một định nghĩa lớp, họ có quyền truy cập vào các phương thức riêng tư, ngay cả khi không có cùng một thể hiện đối tượng. Hàm tạo riêng là tùy chọn và có thể hoặc không có ý nghĩa tùy thuộc vào trường hợp sử dụng. Ba phương pháp tĩnh công khai sau đó chứng minh các cách khác nhau để khởi tạo đối tượng.
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 4 lấy các tham số chính xác cần thiết, sau đó tạo đối tượng bằng cách gọi hàm tạo và trả về kết quả.
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 5 chấp nhận một chuỗi JSON và thực hiện một số xử lý trước trên chính nó để chuyển đổi nó thành định dạng mong muốn của hàm tạo. Sau đó, nó trả về đối tượng mới.
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 6 chấp nhận chuỗi XML, tiền xử lý và sau đó tạo một đối tượng trần. Hàm tạo vẫn được gọi, nhưng vì tất cả các tham số là tùy chọn phương thức bỏ qua chúng. Sau đó, nó gán các giá trị cho các thuộc tính đối tượng trực tiếp trước khi trả về kết quả.
Trong cả ba trường hợp, từ khóa
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 7 được dịch thành tên của lớp, mã được sử dụng. Trong trường hợp này,
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 8. Người phá hủy__destruct (): Void(): void(): void(): void PHP sở hữu một khái niệm phá hủy tương tự như các ngôn ngữ hướng đối tượng khác, chẳng hạn như C ++. Phương pháp phá hủy sẽ được gọi ngay khi không có tài liệu tham khảo nào khác đến một đối tượng cụ thể hoặc theo bất kỳ thứ tự nào trong chuỗi tắt.
Ví dụ #6 Ví dụ về Destruction
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 9
class 0
class 1 Giống như các nhà xây dựng, các hàm hủy của cha mẹ sẽ không được gọi là ngầm bởi động cơ. Để chạy một kẻ hủy diệt cha mẹ, người ta sẽ phải gọi rõ ràng cha mẹ :: __ sestruct () trong cơ thể phá hủy. Cũng giống như các nhà xây dựng, một lớp con có thể thừa hưởng chất hủy diệt của cha mẹ nếu nó không tự thực hiện một.parent::__destruct() in the destructor body. Also like constructors, a child class may inherit the parent's destructor if it does not implement one itself. parent::__destruct() in the destructor body. Also like constructors, a child class may inherit the parent's destructor if it does not implement one itself. parent::__destruct() in the destructor body. Also like constructors, a child class may inherit the parent's destructor if it does not implement one itself. Bộ hủy sẽ được gọi ngay cả khi việc thực thi tập lệnh được dừng bằng EXIT (). Gọi EXIT () trong một bộ hủy sẽ ngăn các thói quen tắt còn lại thực thi.exit(). Calling exit() in a destructor will prevent the remaining shutdown routines from executing. exit(). Calling exit() in a destructor will prevent the remaining shutdown routines from executing. exit(). Calling exit() in a destructor will prevent the remaining shutdown routines from executing. Ghi chú:: : : Destructor được gọi trong quá trình tắt kịch bản đã được gửi tiêu đề HTTP. Thư mục làm việc trong giai đoạn tắt tập lệnh có thể khác với một số SAPIs (ví dụ: Apache).
Ghi chú:: : : Destructor được gọi trong quá trình tắt kịch bản đã được gửi tiêu đề HTTP. Thư mục làm việc trong giai đoạn tắt tập lệnh có thể khác với một số SAPIs (ví dụ: Apache).
Cố gắng ném một ngoại lệ từ một kẻ phá hủy (được gọi trong thời gian chấm dứt kịch bản) gây ra lỗi nghiêm trọng. ¶ ¶ David Dot Scourfield tại Llynfi Dot Co Dot Uk ¶ ¶ class 2
class 3
class 4
class 5
class 6 11 năm trước ¶ ¶ mmulej tại gmail dot com ¶ ¶ class 7
class 8
class 9
class 2
class
class 40class 2
class
class 41SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
2 6 tháng trước ¶ ¶ Domger tại Freenet Dot de ¶ ¶ class 2
class
class 43class 2
class
class 44class 2
class
class 45class 2
class
class 46SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
2 5 năm trước ¶ ¶ IWWP tại Outlook Dot Com ¶ ¶ class 2
class
class 48class 2
class
class 49
<?php class Point { protected int $x; protected int $y; 0
<?php class Point { protected int $x; protected int $y; 1
<?php class Point { protected int $x; protected int $y; 2
<?php class Point { protected int $x; protected int $y; 3
<?php class Point { protected int $x; protected int $y; 4
SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
2 2 năm trước ¶ ¶ lách ¶ ¶
<?php class Point { protected int $x; protected int $y; 6
<?php class Point { protected int $x; protected int $y; 7
<?php class Point { protected int $x; protected int $y; 8
<?php class Point { protected int $x; protected int $y; 9
public function 0
public function 1
public function 2
public function 3
public function 4
SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
2 13 năm trước ¶ ¶ prieler tại ABM Dot tại ¶ ¶
public function 6
public function 7
public function 8
public function 9 15 năm trước ¶ ¶ Yousef Ismaeil cliprz [at] gmail [dot] com ¶ ¶ __construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
0
__construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
1
__construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
2 9 năm trước ¶ ¶ Mỗi Persson ¶ ¶ __construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
3
__construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
4
10 năm trước __construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
6 __construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
5 ¶ ¶ Jonathon Hibbard ¶ ¶ __construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
7
__construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
8
__construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
9
E_DEPRECATED 0 12 năm trước ¶ ¶ Bolshun tại Mail Dot Ru ¶ ¶ E_DEPRECATED 1
14 năm trước ¶ ¶ Bolshun tại Mail Dot Ru ¶ ¶ E_DEPRECATED 2
E_DEPRECATED 3
E_DEPRECATED 4
E_DEPRECATED 5
E_DEPRECATED 6
E_DEPRECATED 7
__construct(int $x, int $y = 0) { $this->x = $x; $this->y = $y; } }// Pass both parameters. $p1 = new Point(4, 5); // Pass only the required parameter. $y will take its default value of 0. $p2 = new Point(4); // With named parameters (as of PHP 8.0): $p3 = new Point(y: 5, x: 4); ?>
1
E_DEPRECATED 9
...$values 00
14 năm trước ¶ ...$values 02
...$values 03
SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
2 14 năm trước ¶ ¶ 14 năm trước ...$values 05
David tại Synatree Dot Com ¶ ¶ ...$values 07
...$values 08
SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
2 ...$values 06 ¶ ...$values 01 ¶
...$values 10
...$values 11
...$values 12
...$values 13
...$values 14 ziggy khi bắt đầu chấm bụi ¶ ¶ 1 tháng trước ¶ ¶ ...$values 15
Reza Mahjourian ¶ ...$values 17
...$values 18
...$values 19
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 00
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 01
<?php class BaseClass { function __construct() { print "In BaseClass constructor\n"; } } 02
SubClass extends BaseClass { function __construct() { parent::__construct(); print "In SubClass constructor\n"; } }class OtherSubClass extends BaseClass { // inherits BaseClass's constructor }// In BaseClass constructor $obj = new BaseClass();// In BaseClass constructor // In SubClass constructor $obj = new SubClass();// In BaseClass constructor $obj = new OtherSubClass(); ?>
216 năm trước ¶. If you want to be able to instantiate a PHP object while passing several different combinations of parameters, use the factory pattern with a private
constructor. Bạn không thể quá tải bất kỳ phương thức nào trong PHP. Nếu bạn muốn có thể khởi tạo một đối tượng PHP trong khi chuyển một số kết hợp các tham số khác nhau, hãy sử dụng mẫu nhà máy với một hàm tạo riêng.. If you want to be able to instantiate a PHP object while passing several different combinations of parameters, use the factory pattern with a private constructor.. If you want to be able to instantiate a PHP object while passing several different combinations of parameters, use the factory pattern with a private constructor. but by using Interfaces in PHP or using Traits in PHP instead of classes, we can implement it. PHP sở hữu một khái niệm phá hủy tương tự như các ngôn ngữ hướng đối tượng khác, chẳng hạn như C ++.Phương pháp phá hủy sẽ được gọi ngay khi không có tài liệu tham khảo nào khác đến một đối tượng cụ thể hoặc theo bất kỳ thứ tự nào trong chuỗi tắt. similar to that of other object-oriented languages, such as C++. The destructor method will be called as soon as there are no other references to a particular object, or in any order during the shutdown sequence. similar to that of other object-oriented languages, such as C++. The destructor method will be called as soon as there are no other references to a particular object, or in any order during the shutdown sequence. similar to that of other object-oriented languages, such as C++. The destructor method will be called as soon as there are no
other references to a particular object, or in any order during the shutdown sequence. Bạn có thể nói rằng các hàm tạo là bản thiết kế để tạo đối tượng cung cấp các giá trị cho các hàm thành viên và biến thành viên.Khi đối tượng được khởi tạo, hàm tạo được gọi tự động.Destructor là để phá hủy các đối tượng và tự động được gọi vào cuối quá trình thực hiện.Constructors are the blueprints for object creation providing values for member functions and member variables. Once the object is initialized, the constructor is automatically called. Destructors are for destroying objects and automatically called at the end of execution.Constructors are the blueprints for object creation providing values for member functions and member variables. Once the object is initialized, the constructor is automatically called. Destructors are for destroying objects and automatically called at the end of execution.Constructors are the blueprints for object creation providing values for member functions and member variables. Once the object is initialized, the constructor is automatically called. Destructors are for destroying objects and automatically called at the end of execution.
|